Design a cabinet, get a manufacturing-ready cut list in seconds.
Enter your cabinet dimensions and options. CABINEX AI instantly calculates every part with correct thickness allowances, plus a Blum / Häfele hardware schedule. Export to CSV or PDF for your workshop.
Cabinet Configuration
All measurements in millimetres (mm).
Adds Häfele pull-out bin unit
Total pieces
8
Panel area
2.64 m²
Hardware SKUs
5
Thickness
18 mm
Manufacturing Output
Auto-calculated with panel-thickness allowances.
| # | Part | Length (mm) | Width (mm) | Thickness | Qty |
|---|---|---|---|---|---|
| 1 | Side panel | 720 | 600 | 18 | ×2 |
| 2 | Top | 564 | 582 | 18 | ×1 |
| 3 | Bottom | 564 | 582 | 18 | ×1 |
| 4 | Back panel | 564 | 684 | 18 | ×1 |
| 5 | Adjustable shelf | 560 | 552 | 18 | ×1 |
| 6 | Door | 716 | 297 | 18 | ×2 |
How the calculation works
• Sides run full-height. Top & bottom fit between the sides (length = W − 2t).
• Back is inset between all four panels (W − 2t × H − 2t).
• Doors overlay with a 2 mm gap all around; auto-split across the door count.
• Drawer boxes account for a 25 mm total runner clearance (Blum Tandem/Movento).
• Runners chosen by drawer depth · hinges chosen by door height.